Optical HD QAM Local Video Insertion
SD/HD MPEG2 and AVC Encoder
VL4500 Series of video encoders allows the MSO to replace the legacy analog audio and video fiber transmitters with a cost effective HD capable multi channel mpeg2 h.264 video encoder. That transport eliminates fiber receivers, encoders and groomers from the headend, thus reducing rack space, power consumption and heat dissipation. The product allows the video encoding and transporting over GigE multiple CableLabs compliant streams, providing a solution for most of the PEG and local video insertion channel loading scenarios.
Closed Caption Support, AFD, Logo Overlay, PiP mode, Ad insertion points, EAS Static image insertion, VLAN support are some of the features that will place the unit right in the MSO’s video environment.
VL4500 Series SRT video transport protocol enables the delivery of high-quality and secure, low-latency video across the public Internet, reducing equipment and transport/service cost.
- Up to eight channels of MPEG-2 or h.264 AVC programs
- ASI, IP, QAM and RFoG outputs
- EIA708 and EIA608 Closed Captions
- AFD with auto resize option
- Broadcast delivery over public Internet with SRT protocol
- Down/Up-conversion option and deinterlacer
- Intuitive web based GUI
SMPTE 259M(SD-SDI)/292M(HD-SDI)/424M(3G), BNC, 75 Ohm
NTSC, BNC, 75 Ohm
10K UNBALANCED STEREO AUDIO, 6-PIN CONNECTOR
ISO/IEC 13818 SPTS/MPTS MPEG TS, 1000BaseT or SFP GigE, Public network/Internet SRT Streaming Protocol
QAM 64/256 Annex B, 54Mhz—1GHz, MER <40, 55dBmV
VIDEO AND AUDIO
MPEG-2 MP@ML: 1-15Mbps
MPEG-2 MP@HL: 2-24Mbps
h.264 AVC MP@L3.0: 0.5-8Mbps
h.264 AVC MP@L4.2: 2-24Mbps
MPEG-2 GOP: 10-60 FRAMES, IBBP
h.264 AVC GOP: 10-240 FRAMES, IBBBBP
RESOLUTIONS: 480i, 720p, 1080i and 1080p
FRAMERATES: 24, 25, 29.97, 30, 59.94 and 60fps
AUDIO CODEC: Dolby Digital 2.0, MPEG Layer2, AAC
SAMPLING RATE: 48kHz
DWDM ITU (ch18 to ch64) Laser, 7mW, 11% OMI
Down-Conversion with Letter box, Anamorphic and center cut
AFD bypass, user input and auto resize
Resolution and framerate conversion
CEA 608 from Line 21, CEA 708 per SMPTE 334M, AFD, SCTE104
ENVIROMENTAL AND POWER
Power: 35W @ 90 to 240VAC (DC Power Brick)
Operational Temp: 0° to 50° C
Storage Temp: -10° to 60° C
Dimensions: 1RU 17.0″ W x 9.0”D x 1.75″ H
Add “Q” at the end of the part number for QAM output option.
Add “QFX” at the end of the part number for RFoG output option.
1. Available in Q1 of 2018
© 2018 Radiant Communications Corporation. All rights reserved. Rev. 11/18
All product and application features and specifications are subject to change at the sole discretion of Radiant Communications Corporation at any time and without notice.